null
  Loading... Please wait...

BatteryMINDer® Model 1500-OBD2: 12V 1.5 AMP Charger-Maintainer-Desulfator W/OBD2 Connector

Price:
$84.22
Availability:
In Stock
Quantity:
Keep your battery charged-maintained without lifting the hood! With all newer vehicles being equipped with an On Board Diagnostic port (OBD)*, batteries can be both charged and maintained by BatteryMINDer® brand charger-maintainer-desulfator without needing to make direct contact with the battery posts or even lifting the hood.

Cars and trucks that may not be driven for weeks or months will typically cause batteries to run down, unable to start the engine especially in cold weather. They will also have become sulfated** permanently affecting their life and performance. By plugging in any of the four (4) BatteryMINDers equipped with the universally matching OBD plug, batteries will first be fully charge and then maintained at 100% capacity, for weeks or months without ever overcharging. In addition, all models feature full-time automatic desulfation extending new battery life by as much as 4 times as well as improving performance of older batteries.

SmarTECHnology™ = Advanced Technology made simple to use.
 
1 Year 100% Money Back Guarantee
5 Year "No Hassle" Warranty.

7 Stages Of Charging

 


Product Description

Features & Benefits:  
BatteryMINDer® Model 1500-OBD2: 12V 1.5 AMP Charger-Maintainer-Desulfator W/OBD2 Connector

  • SAE to OBD2 Connector enables you to keep your battery maintained via your vehicle’s onboard OBD2C Connector.
  • Installed ambient temperature sensor for 0°F–130°F operating range ensures the battery will never be overcharged or undercharged regardless of temperature extremes.
  • Extends battery life up to four times when compared to new batteries not being properly charged-maintained over their lifetime.
  • Maintains up to four batteries at a time (6 or 12 Volt batteries connected in parallel) Requires use of BatteryMINDer® Y-Connectors 210AY (sold separately) or customer supplied 18-Gauge insulated wire.
  • FCC Certified.
  • Worldwide 90-240 VAC 47-63 Hz input.
  • Recovers weak batteries.
  • Automatic Full-Time high frequency (not high voltage) pulse type desulfation.
  • Reverse polarity, short circuit and over temperature protection.
  • Energy Star rated, which means it meets strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy.
  • Certified by the California Energy Commission as meeting the current efficiency standards.
  • Never connect two or more batteries together before fully charging each and checking their condition. Failure to fully charge each battery and check their condition can result in a serious safety hazard.
  • Including but not limited to: Maintenance-free Flooded (filler cap) and sealed, Starter, Deep Cycle, Marine, and Hybrid. Not for use with aircraft batteries. For information about BatteryMINDers designed for use with aircraft batteries, see our Aviation Application page.
  • Not for use with specialty sealed AGM batteries, except for Optima brand sealed AGM

 

What's In the Box Optional Accessories
  • Model 1500 Charger-Maintainer-Desulfator system
  • SAE to OBD2 Connector
  • Battery Clip Cord Set with Quick Connector
  • Ambient temperature sensor (installed)
  • 12ft. power cord
  • Optional permanent mounting tab

 

Click Here To View The Instruction Manual
(PDF opens in a new window)

Please note that you need Adobe Acrobat Reader to view the file.
If you do not have it, CLICK HERE to install it.

Get Adobe Reader

  • 210AY: Y Multiple Battery Connector
  • 210RT: Y Multiple Battery Connector w/ Ring Terminal Connector
  • ABS-248: At the Battery Temperature Sensor
  • ATS-1: Ambient Temperature Sensor
  • BC-AA: Insulated Battery Clip Cord Set
  • BC2AY:  Insulated Battery Clips w/ 210AY Y Multiple Battery Connector
  • DCE12: DC Extension Cables - 12ft.
  • DCE25: DC Extension Cables - 25ft.
  • EZC-01: EZ Connector and Mounting Screws
  • EZC-RT: EZ-Connector & Ring Terminal Assembly w/ Mounting Screws
  • RTA-2415: 2’ Ring Terminal Assembly w/ Quick Connector
  • RTA-7215: 6’ Ring Terminal Assembly w/ Quick Connector
  • VPP-12: 12/24 Volt Vehicle Power Plug

*(typically located under or adjacent to the steering column)
**sulfation is considered the major cause of both shortened life and performance of all lead- acid based batteries including sealed maintenance–free, AGM and Gel types. (Battery Association of America June 1992)

 

 

 

Voltage:
12V
Charging Current:
1.5 AMP
Power Source:
90-240 VAC, 47-63 Hz
Temperature Compensation:
Yes: -4°F (-20°C) to 122°F (50°C)
Overcharge Protection:
Yes
Polarity Reversal Protection:
Yes
International Standard IP60*:
Dust tight: No ingress of dust; complete protection against contact (dust tight).
Multiple Batteries (#):
No
Product Dimensions:
3.93" L x 2.55" H x 1.18" W
Warranty:
5 Year
Works With:
All sizes/types/brands of 12 Volt flooded (filler cap) and sealed maintenance free batteries
Comes With:
SAE to OBD2 Connector, Ambient Temperature Sensor (installed), 12ft. power cord, Battery Clip Cord Set with Quick Connector, Optional Permanent Mounting Tab
Optional Accessories:
210AY, 210RT, ABS-248, ATS-1, BC2AY, BCAA, DCE12, DCE25, EZC-01, EZC-RT, RTA-2415, RTA-7215, VPP12
*:
The IP rating of an enclosure, or Ingress Protection Rating specifies how resistant the device is to foreign objects and moisture.
Write a Review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!