Loading... Please wait...

BatteryMINDer® Model 1510-OBD2: 12V 1.5 AMP Charger-Maintainer-Desulfator

Price:
$85.38
Availability:
Out of Stock
BatteryMINDer® Model 1510-OBD2 has an OBD2 Connector to plug into your Vehicle's OBD2 Port. It includes a full-time automatic high frequency pulse desulfation (not high voltage), which helps extend the life of a battery up to four times over its normal life. Unit can maintain up to four 12 Volt batteries at one time when connected in parallel by using SmarTechnology™ Y-Connectors or customer supplied 18-Gauge insulated wire.

SmarTECHnology™ = Advanced Technology made simple to use.
 
1 Year 100% Money Back Guarantee
10 Year "No Hassle" Warranty.

7 Stages Of Charging

 


Product Description

Features & Benefits:  
BatteryMINDer® Model 1510-OBD2:  12V 1.5
AMP Charger-Maintainer-Desulfator

  • SAE to OBD2 Connector. Enables you to keep your battery maintained via your vehicle’s onboard OBD2C Connector.
  • Installed ambient temperature sensor for 0°F–130°F operating range ensures the battery will never be overcharged or undercharged regardless of temperature extremes.
  • Extends battery life up to four times when compared to new batteries not being properly charged-maintained over their lifetime.
  • Maintains up to four batteries at a time (6 or 12 Volt batteries connected in parallel) Requires use of BatteryMINDer® Y-Connector 210AY (sold separately) or customer supplied 18-Gauge insulated wire.
  • FCC Certified.
  • Worldwide 90-240 VAC, 47-63 Hz Hz input.
  • Recovers weak batteries.
  • Automatic Full-Time high frequency (not high voltage) pulse type desulfation.
  • Reverse polarity, short circuit and over temperature protection.
  • Energy Star rated, which means it meets strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy.
  • Certified by the California Energy Commission as meeting the current efficiency standards.
  • Never connect two or more batteries together before fully charging each and checking their condition. Failure to fully charge each battery and check their condition can result in a serious safety hazard.
  • Including but not limited to: Maintenance-free Flooded (filler cap) and sealed, Starter, Deep Cycle, Marine, and Hybrid. Not for use with aircraft batteries. For information about BatteryMINDers designed for use with aircraft batteries, see our Aviation Application page.
  • Not for use with specialty sealed AGM batteries, except for Optima brand sealed AGM.

 

What's In the Box Optional Accessories
  • Model 1510 Charger-Maintainer-Desulfator
  • SAE to OBD2 Connector
  • Battery Clip Cord Set with Quick Connector
  • Ambient temperature sensor (installed)
  • 12ft. power cord
  • Optional permanent mounting tab

 

Click Here To View The Instruction Manual
(PDF opens in a new window)

Please note that you need Adobe Acrobat Reader to view the file.
If you do not have it, CLICK HERE to install it.

Get Adobe Reader

  • 210AY: Y Multiple Battery Connector
  • 210RT: Y Multiple Battery Connector w/ Ring Terminal Connector
  • ABS-248: At the Battery Temperature Sensor
  • ATS-1: Ambient Temperature Sensor
  • BC-AA: Insulated Battery Clip Cord Set
  • BC2AY:  Insulated Battery Clips w/ 210AY Y Multiple Battery Connector
  • DCE12: DC Extension Cables - 12ft.
  • DCE25: DC Extension Cables - 25ft.
  • EZC-01: EZ Connector and Mounting Screws
  • EZC-RT: EZ-Connector & Ring Terminal Assembly w/ Mounting Screws
  • RTA-2415: 2’ Ring Terminal Assembly w/ Quick Connector
  • RTA-7215: 6’ Ring Terminal Assembly w/ Quick Connector
  • VPP-12: 12/24 Volt Vehicle Power Plug
Voltage:
12V
Charging Current:
1.5 AMP
Power Source:
90-240 VAC, 47-63 Hz
Temperature Compensation:
Yes: -4°F (-20°C) to 122°F (50°C)
Overcharge Protection:
Yes
Polarity Reversal Protection:
Yes
International Standard IP60*:
Dust tight: No ingress of dust; complete protection against contact (dust tight).
Multiple Batteries (#):
4
Product Dimensions:
3.93" L x 2.55" W x 1.18" H
Warranty:
10 Year
Works With:
All sizes, types and brands of 12 Volt flooded (filler cap) and sealed maintenance free batteries.
Comes With:
SAE to OBD2 Connector, Ambient Temperature Sensor (installed), 12ft. power cord, Battery Clip Cord Set with Quick Connector, Optional Permanent Mounting Tab
Optional Accessories:
210AY, 210RT, ABS-248, ATS-1, BC2AY, BCAA, DCE12, DCE25, EZC-01, EZC-RT, RTA-2415, RTA-7215, VPP12
*:
The IP rating of an enclosure, or Ingress Protection Rating specifies how resistant the device is to foreign objects and moisture.
Write a Review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!