BatteryMINDer® Model 1510: 12-Volt 1.5 Amp Maintenance Charger/Desulfator Including a 10 Year Warranty

Certified Efficiency

Not only is this unit FCC Certified as meeting or exceeding the requirements set forth for electronics products by this commission, but it is also certified by the California Energy Commission as meeting the current efficiency standards.

Quadruple Your Battery's Life

The SmarTECHnology™ Plug 'n Run 1.5 Amp battery charger/maintainer system features a full-time automatic pulse desulfator that can help extend a battery's life up to 4 times its normal life when compared to new batteries that are not being properly charged/maintained over their lifetime. Just plug it in and the BatteryMINDer® takes care of the rest.

The Right Charge Every Time
An automatic high-low temperature compensator is installed in the BatteryMINDer® to ensure that batteries will never be overcharged or undercharged, regardless of the operating temperature. This ambient temperature sensor is installed for a -4°F (-20°C) to 122°F (50°C).

Multi-Talented Performance
If you're looking for versatility, look no further! The BatteryMINDer® can be used for charging, maintaining or recovering 12V batteries. The unit uses automatic full-time high frequency (not high voltage) pulse-type desulfation that is ideal for helping to recover weak batteries.

Works with a Variety of Battery Types
Flooded, sealed, maintenance-free, starter, deep cycle, Optima brand sealed AGM, and marine batteries — the BatteryMINDer® handles them all. This unit can even maintain up to 4 batteries at one time when connected in parallel (parallel connection requires use of Y-connectors, Item# 27879, sold separately, or an 18ga. insulated wire, not included).

Dependable Protection
For your safety, the well-being of your battery, and your own peace of mind, this charger system is equipped with built-in reverse polarity, short circuit protection and over-temperature protection.

• Installed ambient temperature sensor for -4°F (-20°C) to 122°F (50°C) operating range ensures the battery will never be overcharged or undercharged regardless of temperature extremes.
• Extends battery life up to four times when compared to new batteries not being properly charged-maintained over their lifetime.
• Maintains up to four batteries at a time (6 or 12 Volt batteries connected in parallel) Requires use of Y-Connectors 210AY (sold separately) or customer supplied 18-Gauge insulated wire.
• FCC Certified.
• Worldwide 90-240 VAC 47-63 Hz input.
• Recovers weak batteries.
• Automatic Full-Time high frequency (not high voltage) pulse type desulfation.
• Reverse polarity, short circuit and over temperature protection.

• Energy Star rated, which means it meets strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy.
• Certified by the California Energy Commission as meeting the current efficiency standards.
• Never connect two or more batteries together before fully charging each and checking their condition. Failure to fully charge each battery and check their condition can result in a serious safety hazard.
• Including but not limited to: Maintenance-free Flooded (filler cap) and sealed, Starter, Deep Cycle, Marine, and Hybrid.
• Not for use with aircraft batteries. For information about BatteryMINDers designed for use with aircraft batteries, see our Aviation Application page.
• Not for use with specialty sealed AGM batteries, except for Optima brand sealed AGM, choose model 2012-AGM for these battery types. Choose model 2012 for standard AGM types. 

• Model 1510 Charger-Maintainer-Desulfator 
• Ring Terminal Assembly with Quick Connector
• Insulated battery clips
• Ambient temperature sensor (installed)
• 12ft. power cord
• Optional permanent mounting tab

Click Here To View The Instruction Manual
(PDF opens in a new window)
Please note that you need Adobe Acrobat Reader to view the file.
If you do not have it, CLICK HERE to install it.

• 210AY: Y Multiple Battery Connector
• 210RT: Y Multiple Battery Connector w/ Ring Terminal Connector
• ABS-248: At the Battery Temperature Sensor
• ATS-1: Ambient Temperature Sensor
• BC-AA: Insulated Battery Clip Cord Set
• BC2AY:  Insulated Battery Clips w/ 210AY Y Multiple Battery Connector
• DCE12: DC Extension Cables - 12ft.
• DCE25: DC Extension Cables - 25ft.
• EZC-01: EZ Connector and Mounting Screws
• EZC-RT: EZ-Connector & Ring Terminal Assembly w/ Mounting Screws
• RTA-2415: 2’ Ring Terminal Assembly w/ Quick Connector
• RTA-7215: 6’ Ring Terminal Assembly w/ Quick Connector
• VPP-12: 12/24 Volt Vehicle Power Plug