Loading... Please wait...

BatteryMINDer® Model 1510: 12-Volt 1.5 Amp Maintenance Charger/Desulfator Including a 10 Year Warranty

Price:
$68.88
Availability:
In Stock
Quantity:
BatteryMINDer® Model 1510 features a SmarTECHnology™ plug 'n run 1.5 Amp battery charger/maintainer with full-time automatic high frequency pulse desulfator (not high voltage)that can help extend a battery's life up to 4 times its normal life. Ideal for charging, maintaining or recovering 12V flooded, sealed, maintenance-free, starter, deep-cycle, Optima brand sealed AGM, and marine batteries. Worldwide 100–240 VAC 50/60 Hz input. FCC compliant and California Energy Commission certified. The unit can maintain up to four 12 Volt batteries at one time when connected in parallel by using SmarTechnology™ Y-Connectors (part# 210AY) or customer supplied 18-Gauge insulated wire.

The 1510 features all the same great capabilities of our most popular model, the 1500 but also includes the RTA-2415 Ring Terminal Assembly (a $10 Value), BC-AA Battery Clips (a $19.95 Value) & A 10 YEAR WARRANTY!

SmarTECHnology™ = Advanced Technology made simple to use.
 
1 Year 100% Money Back Guarantee
10 Year "No Hassle" Warranty.

7 Stages Of Charging


Product Description

Model 1510

Certified Efficiency

Not only is this unit FCC Certified as meeting or exceeding the requirements set forth for electronics products by this commission, but it is also certified by the California Energy Commission as meeting the current efficiency standards.

Quadruple Your Battery's Life

The SmarTECHnology™ Plug 'n Run 1.5 Amp battery charger/maintainer system features a full-time automatic pulse desulfator that can help extend a battery's life up to 4 times its normal life when compared to new batteries that are not being properly charged/maintained over their lifetime. Just plug it in and the BatteryMINDer® takes care of the rest.

The Right Charge Every Time
An automatic high-low temperature compensator is installed in the BatteryMINDer® to ensure that batteries will never be overcharged or undercharged, regardless of the operating temperature. This ambient temperature sensor is installed for a -4°F (-20°C) to 122°F (50°C).

Multi-Talented Performance
If you're looking for versatility, look no further! The BatteryMINDer® can be used for charging, maintaining or recovering 12V batteries. The unit uses automatic full-time high frequency (not high voltage) pulse-type desulfation that is ideal for helping to recover weak batteries.

Works with a Variety of Battery Types
Flooded, sealed, maintenance-free, starter, deep cycle, Optima brand sealed AGM, and marine batteries — the BatteryMINDer® handles them all. This unit can even maintain up to 4 batteries at one time when connected in parallel (parallel connection requires use of Y-connectors, Item# 27879, sold separately, or an 18ga. insulated wire, not included).

Dependable Protection
For your safety, the well-being of your battery, and your own peace of mind, this charger system is equipped with built-in reverse polarity, short circuit protection and over-temperature protection.

Quality Components
The BatteryMINDer® is constructed using a 12ft. power cord and heavy-duty battery clips as well as other top quality components to provide lasting performance. The 90-240V AC 47-63 Hz input allows for worldwide use.

Energy Star Rated
If you're looking for assurance that this product is the real deal, look no further than its Energy Star rating. The BatteryMINDer® meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and the Department of Energy, so you can rest assured it performs at the highest of levels.

---

 

 

 

Features & Benefits:
  • Installed ambient temperature sensor for -4°F (-20°C) to 122°F (50°C) operating range ensures the battery will never be overcharged or undercharged regardless of temperature extremes.
  • Extends battery life up to four times when compared to new batteries not being properly charged-maintained over their lifetime.
  • Maintains up to four batteries at a time (6 or 12 Volt batteries connected in parallel) Requires use of Y-Connectors 210AY (sold separately) or customer supplied 18-Gauge insulated wire.
  • FCC Certified.
  • Worldwide 90-240 VAC 47-63 Hz input.
  • Recovers weak batteries.
  • Automatic Full-Time high frequency (not high voltage) pulse type desulfation.
  • Reverse polarity, short circuit and over temperature protection.
  • Energy Star rated, which means it meets strict energy efficiency guidelines set by the US Environmental Protection Agency and the Department of Energy.
  • Certified by the California Energy Commission as meeting the current efficiency standards.
  • Never connect two or more batteries together before fully charging each and checking their condition. Failure to fully charge each battery and check their condition can result in a serious safety hazard.
  • Including but not limited to: Maintenance-free Flooded (filler cap) and sealed, Starter, Deep Cycle, Marine, and Hybrid.
  • Not for use with aircraft batteries. For information about BatteryMINDers designed for use with aircraft batteries, see our Aviation Application page.
  • Not for use with specialty sealed AGM batteries, except for Optima brand sealed AGM, choose model 2012-AGM for these battery types. Choose model 2012 for standard AGM types. 

 

What's In the Box Optional Accessories
  • Model 1510 Charger-Maintainer-Desulfator 
  • Ring Terminal Assembly with Quick Connector
  • Insulated battery clips
  • Ambient temperature sensor (installed)
  • 12ft. power cord
  • Optional permanent mounting tab

 

Click Here To View The Instruction Manual
(PDF opens in a new window)

Please note that you need Adobe Acrobat Reader to view the file.
If you do not have it, CLICK HERE to install it.

Get Adobe Reader

  • 210AY: Y Multiple Battery Connector
  • 210RT: Y Multiple Battery Connector w/ Ring Terminal Connector
  • ABS-248: At the Battery Temperature Sensor
  • ATS-1: Ambient Temperature Sensor
  • BC-AA: Insulated Battery Clip Cord Set
  • BC2AY:  Insulated Battery Clips w/ 210AY Y Multiple Battery Connector
  • DCE12: DC Extension Cables - 12ft.
  • DCE25: DC Extension Cables - 25ft.
  • EZC-01: EZ Connector and Mounting Screws
  • EZC-RT: EZ-Connector & Ring Terminal Assembly w/ Mounting Screws
  • RTA-2415: 2’ Ring Terminal Assembly w/ Quick Connector
  • RTA-7215: 6’ Ring Terminal Assembly w/ Quick Connector
  • VPP-12: 12/24 Volt Vehicle Power Plug
Voltage:
12V
Charging Current:
1.5 AMP
Power Source:
90-240 VAC, 47-63 Hz
Temperature Compensation:
Yes: -4°F (-20°C) to 122°F (50°C)
Overcharge Protection:
Yes
Polarity Reversal Protection:
Yes
International Standard IP60:
Dust tight: No ingress of dust; complete protection against contact (dust tight).
Multiple Batteries (#):
4
Product Dimensions:
3.9" L x 2.55" W x 1.18" H
Warranty:
10 Year
Works with:
All sizes/types/brands of 12 Volt flooded (filler cap) and sealed maintenance free batteries
Comes With:
Ambient Temperature Sensor (installed), 12ft. power cord, Battery Clip Cord Set with Quick Connector, Optional Permanent Mounting Tab
Optional Accessories:
210AY, 210RT, ABS-248, ATS-1, BC2AY, BCAA, DCE12, DCE25, EZC-01, EZC-RT, RTA-2415, RTA-7215, VPP12
*:
The IP rating of an enclosure, or Ingress Protection Rating specifies how resistant the device is to foreign objects and moisture.
Write a Review

Product Reviews

Previous | Showing reviews 21-27 of 27

  1. Minder in question

    Posted by Alan on 20th Jul 2015

    Just installed this on my Generac Generator and its monitoring and charging just fine. Installing this was a little bit of a pain but not due to the devise in question. I will mention that a new battery was installed as well so as for longevity on this unit the jury is still out.
    The unit is well made and hope this gets me a few extra years.
    Will be buying another one for my tractor as well.


  2. Nice product

    Posted by Unknown on 28th Apr 2015

    It's only been like a week but it seems to be working just fine.


  3. Definitly will extend your batteries life.

    Posted by LON on 14th Apr 2015

    I have had a BATTERY MINDER for my aircraft for ten years. Same battery ! I just received one for my truck and expect it will work the same on it's battery.


  4. Awesome!

    Posted by BT on 14th Apr 2015

    I have two of them and several ring clips for use on multiple batteries at different places I go. One day later a totally spent battery is acting new again. great products. Also have a 12248 model for a few yrs. Great products and they keep you from having to buy batteries for seldom used vehicles. I have a 2053cc motorcycle that needs to ridden 100 miles to keep battery fresh. This device keeps me sane and my motorcycle batteries as well.


  5. Love this charger

    Posted by Harry Neel on 19th Feb 2015

    This is my 7th charger. Not only toppong off my batteries but desulfating them. I would not buy any other type of trickle charger.


  6. Works as advertised

    Posted by HG Thomas on 30th Jan 2015

    My objective in buying this pproduct was to insure that my vehicle, which presently cranks, but fails to start, will continue to crank until I get it running again. This product promised to do that and more. It dose.


  7. Loyal Fan

    Posted by geo. on 20th Jan 2015

    As a decades old fan of vdc products I have seen how they consistently improve their products. I started using a model 12112 on two group 29 solar batteries. I've switched to a 12117 and now a 1510. These ten year old batteries use a minimal amount of water and always read high on the specific gravity scale. I am the go to guy for the neighbors abused batteries usually successfully recovering there batteries as well.
    i currently own six 12117, two 1510 and a few very early models.


Previous | Showing reviews 21-27 of 27