Loading... Please wait...

BatteryMINDer® Model 12106: 6V 1 AMP Charger-Maintainer-Desulfator (DISCONTINUED)

Out of stock
BatteryMINDer® 12106 is a 2 stage Charger-Maintainer-Desufator that extends performance and life of 6 Volt lead acid batteries including flooded (filler cap, maintenance-free, valve regulated lead-acid [VRLA], sealed lead-acid [SLA]), starter, deep cycle and hybrid. It automatically dissolves harmful power-robbing sulfation using safe, low voltage, patented high-frequency pulse technology. Can be left connected for extended, non-use periods without overcharging. Unit can maintain up to four batteries at one time (6 Volt batteries in parallel) when connected in parallel by using SmarTechnology™ Y-Connectors (part# 210AY ) or customer supplied 18-Gauge insulated wire. Not for gel or aviation batteries.

SmarTECHnology™ = Advanced Technology made simple to use.
1 Year 100% Money Back Guarantee
5 Year "No Hassle" Warranty.

Product Description

Features & Benefits:  
BatteryMINDer® Model 12106: 6-Volt 1 AMP Charger-Maintainer-Desulfator

Important:  Never use a charger without temperature compensation if your battery compartment is above 90° F.   Please contact our Tech Support Department for more information.

  • Charges and maintains your battery without overcharging it, guaranteed.
  • Features two stage charging program: Charge and Float-Maintenance with desulfation in both stages (full-time.)
  • Utilizes full-time battery monitoring to automatically test the battery several times a second, supplying only the current needed to maintain battery at full charge.
  • Utilizes safe variable high frequency pulse desulfation to dissolve both old and newly formed sulfate from battery's plates that prevent the batteries from holding a full charge. To read more about the effects of sulfation on batteries, see the proprietary Desulfation section on our Knowledge section.
  • Maximizes battery life and capacity; reconditions weak batteries.
  • Provides short circuit, spark and polarity protection.
  • Reduces the need to add water to maintenance-type batteries during long, non-use storage.
  • Costs less than 10¢ per month for full time maintenance.
  • Shows if connections are correct via charge indicator and “blinks” when battery reaches full charge.
  • Allows battery to be stored safely at 0º to 120º F providing they were previously maintained using a BatteryMINDer®.
  • Charges/maintains up to 4 batteries at a time (6 Volt batteries in parallel.) Requires use of Y-Connectors 210AY (sold separately) or customer supplied 18 gauge wire.2
  • Never connect two or more batteries together before fully charging each and checking their condition. Failure to fully charge each battery and check their condition can result in a serious safety hazard.
  • Including but not limited to: flooded (filler cap, maintenance-free, valve regulated lead-acid [VRLA], sealed lead-acid [SLA]), starter, deep cycle and hybrid.  Not for use with gel or aircraft batteries.  For information about BatteryMINDers designed for use with aircraft batteries, see our Aviation Application page. 
What's In the Box Optional Accessories
  • Model 12106 Charger-Maintainer-Desulfator
  • 11’ DC cord with Quick Connector
  • Battery Clip Cord Set with Quick Connector
  • Fused Ring Terminal Cord Set with Quick Connector


Click Here To View The Instruction Manual
(PDF opens in a new window)

Please note that you need Adobe Acrobat Reader to view the file.
If you do not have it, CLICK HERE to install it.

Get Adobe Reader

  • 210AY: Y Multiple Battery Connector
  • 210RT: Y Multiple Battery Connector w/ Ring Terminal Connector
  • BC-AA: Insulated Battery Clip Cord Set
  • BC2AY:  Insulated Battery Clips w/ 210AY Y Multiple Battery Connector
  • DCE12: DC Extension Cables - 12ft.
  • DCE25: DC Extension Cables - 25ft.
  • EZC-01: EZ Connector and Mounting Screws
  • EZC-RT: EZ-Connector & Ring Terminal Assembly w/ Mounting Screws
  • RTA-2415: 2’ Ring Terminal Assembly w/ Quick Connector
  • RTA-7215: 6’ Ring Terminal Assembly w/ Quick Connector
  • VPP-12: 12/24 Volt Vehicle Power Plug
Charging Current:
Power Source:
105-130 VAC, 50/60 Hz
Temperature Compensation:
Overcharge Protection:
Polarity Reversal Protection:
Multiple Batteries (#):
Product Dimensions:
3.75” L x 2.5” W x 2.25” H
5 Year
Works With:
All sizes, types and brands of 6 Volt lead-acid batteries
Comes With:
11’ DC cord with Quick Connector, Battery Clip Cord Set with Quick Connector, Fused Ring Terminal Cord Set with Quick Connector, Instruction Manual
Optional Accessories:
210AY, 210RT, BC2AY, BC-AA, DCE12, DCE25, EZC-01, EZC-RT, RTA-2415, RTA-7215, VPP-12
Write a Review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!