null
  Loading... Please wait...

BatteryMINDer® Model 128CEC2-OBD2: 12V 2/4/8 AMP Charger-Maintainer-Desulfator W/ OBD2 Connector & Lithium Charger Maintainer

Price:
$248.00
Availability:
In Stock
Quantity:
Keep your battery charged-maintained without lifting the hood! With all newer vehicles being equipped with an On Board Diagnostic port (OBD)*, batteries can be both charged and maintained by BatteryMINDer® brand chargers-maintainers-desulfators WITHOUT needing to make direct contact with the battery posts or even lifting the hood. Cars and trucks that may not be driven for weeks or months will typically cause batteries to run down, unable to start the engine especially in cold weather. They will also have become sulfated** permanently affecting their life and performance.

*(typically located under or adjacent to the steering column) **sulfation is considered the major cause of both shortened life and performance of all lead- acid based batteries including sealed maintenance–free, AGM types. (Battery Association of America June 1992)

NOT FOR AVIATION!
CLICK HERE TO VIEW OUR AVIATION MODELS

 SmarTECHnology™ = Advanced Technology made simple to use.
 
1 Year 100% Money Back Guarantee
5 Year "No Hassle" Warranty.


Product Description

Features & Benefits:  
BatteryMINDer® Model 128CEC2-OBD2: 12-Volt 2/4/8 AMP Lead Acid Charger-Maintainer-Desulfator w/OBD2 Connector & Lithium Charger Maintainer

User-Selectable Settings for All Sealed / Wet (filler cap) /Maintenance-Free / AGM / Deep Cycle / RV / Marine / PLT and Odyssey brand Lead-Acid** based Batteries. Diagnoses battery’s condition – can predict failing batteries before they die. For ALL 12-Volt Sealed and Wet “Filler Caps” Batteries Including AGM, PLT and Odyssey®. This BatteryMINDer® is an Odyssey-approved charger.

 

Selecting the Correct Amperage for Lead Acid Batteries:

All BatteryMINDers are regulated and will not overcharge, no matter what amp selection you make. It is just a matter of how fast you need to charge the battery. 

  • If you know the battery is charged and in good shape use the 2 Amp setting.
  • If you are charging a large deep cycle battery or more than one battery than use 4 Amp setting.
  • You will probably use the wet/AGM/sealed selection most of the time. Use the Odyssey selection on all named Odyssey batteries at the 8 Amp setting. 

 

  • Guaranteed to never overcharge/undercharge between temperature extremes considered safe to charge or maintain by major battery manufacturers.
  • Push-button Selection for ALL battery types and charge rates.
  • 100% Full - Time U.S. Patented Pulse-type Desulfation keeps Lead Acid battery free of sulfate or dissolves sulfate completely in older batteries.
  • Detects and rejects batteries with bad cells.
  • Maximize battery life and capacity, recovers weak batteries.
  • Diagnoses battery’s condition / state-of-charge.
  • Recovers weak or deeply discharged batteries: including but not limited to flooded filler cap, maintenance-free, valve regulated lead-acid (VRLA), sealed lead-acid (SLA), starter, deep cycle and hybrid.
  • Maintain up to 8 batteries at a time. (requires BatteryMINDer® Y-Connector Accessory(s) 210-AY).
  • Auto-Restart after power failure.  
  • Automatic disconnect and resume if AC power is interrupted.
  • Bad cell detection with auto-shutdown.
  • Includes Short circuit, spark, reverse polarity protection, thermal runaway protection, automatic D/C disconnect on A/C failure and quick-connect/disconnect fused alligator clip assembly.
  • Very high efficiency. California CEC Approved.
  • Automatically detects input AC power.
  • ECO-mode with hi-efficiency / low power consumption.
  • Ambient temperature compensation. Built-in temperature sensor automatically adjusts charge rate to ensure full-charge between temperature extremes considered safe to charge or maintain by major battery manufacturers.
  • 18 LED indicators show state-of-charge and important status mode / battery condition.
  • Rugged, vibration-resistant construction.
  • Never connect two or more batteries together before fully charging each and checking their condition. Failure to fully charge each battery and check their condition can result in a serious safety hazard.
  • Not for nickel–cadmium (NiCad), nickel–metal hydride (NiMH) or aircraft batteries. 

 

What's In the Box Optional Accessories
  • Model 128CEC2 Charger-Maintainer-Desulfator
  • SAE to OBD2 Connector
  • 6' AC cord, 6' DC cord with quick connector (SAE)
  • Auto-Temp Compensation Sensor (Installed)
  • Insulated Battery Clip Cord Set with Quick Connector and 15A replaceable fuse
  • Ring Terminal Cord Set with Quick Connector and 15A replaceable fuse

 

Click Here To View The Instruction Manual
(PDF opens in a new window)

Please note that you need Adobe Acrobat Reader to view the file.
If you do not have it, CLICK HERE to install it.

Get Adobe Reader

  • 210AY: Y Multiple Battery Connector
  • 210RT: Y Multiple Battery Connector w/ Ring Terminal Connector
  • ABS-248: At the Battery Temperature Sensor
  • ATS-1: Ambient Temperature Sensor
  • BC-AA: Insulated Battery Clip Cord Set
  • BC2AY:  Insulated Battery Clips w/ 210AY Y Multiple Battery Connector
  • DCE12: DC Extension Cables - 12ft.
  • DCE25: DC Extension Cables - 25ft.
  • EZC-01: EZ Connector and Mounting Screws
  • EZC-RT: EZ-Connector & Ring Terminal Assembly w/ Mounting Screws
  • RTA-2415: 2’ Ring Terminal Assembly w/ Quick Connector
  • RTA-7215: 6’ Ring Terminal Assembly w/ Quick Connector
  • VPP-12: 12/24 Volt Vehicle Power Plug
Voltage:
12V
Charging Current:
2/4/8 AMP
Power Source:
90-140 VAC, 47-63 Hz
Temperature Compensation:
Yes: -4°F (-20°C) to 122°F (50°C)
Overcharge Protection:
Yes
Polarity Reversal Protection:
Yes
International Standard IP65*:
Dust tight: No ingress of dust; complete protection against contact (dust tight). Protection from water projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effects.
Multiple Batteries (#):
8
Product Dimensions:
4.9” L x 7.3” W x 2.1” H
Warranty:
5 Year
Works With:
All sizes/types/brands of 12 Volt flooded (filler cap) and sealed maintenance free batteries and 12V Lithium Batteries
Comes with:
OBD2 Connector, Auto-Temp Compensation Sensor (Installed), 2' Insulated Battery Clip Cord Set with Quick Connector and 15A replaceable fuse, 2' Ring Terminal Cord Set, Instruction Manual
Optional Accessories:
210AY, 210RT, ABS-248, ATS-1, BCAA, DCE12, DCE25, EZC-01, EZC-RT, RTA-2415, RTA-7215, VPP12
*:
The IP rating of an enclosure, or Ingress Protection Rating specifies how resistant the device is to foreign objects and moisture.
Write a Review

Product Reviews

  1. Exceedes expectations

    Posted by Tom on 28th Dec 2023

    Charged one, then two then hooked in parallel 10, now it is maintaining 15 17AH hour and two wet led acid all at the same time.