Loading... Please wait...

BatteryMINDer® Model 15CEC1B: 12V 1.5 AMP Charger-Maintainer-Desulfator with Push-Button Battery Indicator

In Stock
Combining our best-selling model 1500 with our simple to understand push-button battery tester makes caring for your batteries easier than ever. No need to guess what your battery needs. By easily testing the battery with the Battery Condition Indicator, user is able to determine if it needs to be fully recharged, is holding its charge or just simply maintained.

BatteryMINDer® Model 1500 is a true seven (7) stage charger with full-time* high frequency (not high voltage) desulfation. Its industrial grade microprocessor assures precise operation in all modes over its expected five-plus years of operation 24/7. With true temperature compensation sensing (over the full-temperature range required by all battery makers), potential over and under charging is completely eliminated. Simple operation with no buttons or switches to set the 1500 can be left connected to a single or multiple batteries** indefinitely without worry. Its low power consumption makes it economical, consuming less than $0.50/month in electricity operating 24/7-365.

SmarTECHnology™ = Advanced Technology made simple to use.
1 Year 100% Money Back Guarantee
5 Year "No Hassle" Warranty.

Product Description

Features & Benefits: 
BatteryMINDer® Model 15CEC1B: 12-Volt 1.5 AMP Charger-Maintainer-Desulfator with Push-Button Battery Indicator

  • Fully automatic operation with 100% Full-Time HF (not high voltage) desulfation pulses, generated during all stages of charging and maintaining.
  • Guaranteed never to over- or under-charge across temperature extremes considered safe to charge or maintain by major battery manufacturers
  • Maintains 4 batteries with just one unit (requires accessory 210AY).
  • For ALL sealed, maintenance-free, wet cell (filler caps) including marine, deep cycle and AGM.
  • 7-stage charging profile ensuring longest possible battery life precisely controlled by industrial grade microprocessor.
  • Temperature Sensor controls output voltage to ensure full charge regardless of temperature by covering the entire temperature range permitted by leading battery manufacturers for charging and maintaining lead-acid based batteries.
  • Recovers weak / deeply discharged batteries as low as 3-volt.
  • Detects weak / dead cells, rejects shorted-defective batteries.
  • Auto turn-on after power failure.
  • ECO Mode reduces electrical consumption to pennies a day.
  • Over-temperature, reverse polarity and short-circuit protected.
  • Never connect two or more batteries together before fully charging each and checking their condition. Failure to fully charge each battery and check their condition can result in a serious safety hazard.
What's In the Box Optional Accessories
  • Model 1500 Charger-Maintainer-Desulfator
  • Battery Condition Indicator
  • Set of battery clips
  • Ambient temperature sensor (installed)
  • 12ft. power cord
  • Optional permanent mounting tab


Click Here To View The Instruction Manual
(PDF opens in a new window)
Please note that you need Adobe Acrobat Reader to view the file.
If you do not have it, CLICK HERE to install it.

Get Adobe Reader

  • 210AY: Y Multiple Battery Connector
  • 210RT: Y Multiple Battery Connector w/ Ring Terminal Connector
  • ABS-248: At the Battery Temperature Sensor
  • ATS-1: Ambient Temperature Sensor
  • BC-AA: Insulated Battery Clip Cord Set
  • BC2AY:  Insulated Battery Clips w/ 210AY Y Multiple Battery Connector
  • DCE12: DC Extension Cables - 12ft.
  • DCE25: DC Extension Cables - 25ft.
  • EZC-01: EZ Connector and Mounting Screws
  • EZC-RT: EZ-Connector & Ring Terminal Assembly w/ Mounting Screws
  • RTA-2415: 2’ Ring Terminal Assembly w/ Quick Connector
  • RTA-7215: 6’ Ring Terminal Assembly w/ Quick Connector
  • VPP-12: 12/24 Volt Vehicle Power Plug
Charging Current:
1500 mA
Power Source:
90-240 VAC, 47-63 Hz
Temperature Compensation:
Yes: -4°F (-20°C) to 122°F (50°C)
Overcharge Protection:
Polarity Reversal Protection:
International Standard IP60*:
Dust tight: No ingress of dust; complete protection against contact (dust tight).
Multiple Batteries (#):
Product Dimensions:
15CEC1: 2.6” L x 3.9” W x 1.2” H; BCI: 2.0" L x 1.75" W x 0.8" H
5 Year
Works With:
12V flooded (filler cap), sealed, maintenance-free, starter, deep cycle, Optima brand sealed AGM, marine batteries
Comes With:
Set of battery clips, Ambient Temperature Sensor (installed), Battery Condition Indicator, 12ft. power cord, Optional permanent mounting tab
Optional Accessories:
210AY, 210RT, ABS-248, ATS-1, BC2AY, BCAA, DCE12, DCE25, EZC-01, EZC-RT, RTA-2415, RTA-7215, VPP12
The IP rating of an enclosure, or Ingress Protection Rating specifies how resistant the device is to foreign objects and moisture.
Write a Review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!