null
  Loading... Please wait...

BatteryMINDer® Model 244CEC2-AA-S2: 24V 4 AMP GILL® Aviation Battery Charger-Maintainer-Desulfator

Price:
$289.00
Availability:
In Stock
Quantity:
Our GILL® battery aviation-specific BatteryMINDer® battery charger-maintainer-desulfator is the most advanced we have ever produced. In addition to charging and maintaining sealed or wet cell (filler caps) GILL® aviation batteries users can now determine the level of charge remaining in their battery, and if weak and in need of replacement, before going bad. Units test for weak/dead cells and will recover weak or severely discharged batteries that other chargers would reject. Known as the CEC2-AA series they feature advancements in easy to understand battery analysis and condition not previously available in any other single model. Their high efficiency design, controlled by industrially-rated microprocessors, allow continuous operation (24 hrs/day) for less than $0.43/month* Temperature sensors prevents over/under charging from freezing to 130-F.

SmarTECHnology™ = Advanced Technology made simple to use.
 
1 Year 100% Money Back Guarantee
5 Year "No Hassle" Warranty.

 


Product Description

Features & Benefits:  
BatteryMINDer® Model 244CEC2-AA-S2: 24-Volt 4 AMP GILL® Aviation Battery Charger-Maintainer-Desulfator

These chargers-maintainers-desulfators are designed for all size and type 24-Volt GILL® Aviation Aviation Batteries. If you want the longest possible life and performance from your batteries there is no other product better at doing just this and BatteryMINDer® Guarantees it! 

NONE OF OUR AIRCRAFT MODELS ARE DESIGNED TO FUNCTION AT INPUT VOLTAGES ABOVE 120 VAC EXCEPT WHEN COMBINED WITH AN ISOLATION STEP-DOWN TRANSFORMER.

  • Guaranteed to never overcharge/undercharge. (33°F to 130°F)
  • Tested and endorsed by leading Battery makers.
  • 100% Full - Time U.S. Patented Pulse-type Desulfation keeps battery free of sulfate or dissolves sulfate completely in older batteries.
  • Detects and rejects batteries with bad cells. Terminate charge to prevent out-gassing.
  • Maximize battery life and capacity, recovers weak batteries.
  • Diagnoses battery’s condition / state-of-charge.
  • Recovers weak or deeply discharged batteries: including but not limited to flooded filler cap, maintenance-free, valve regulated lead-acid (VRLA), sealed lead-acid (SLA), starter, deep cycle and hybrid.
  • Maintain up to 2 batteries at a time. (requires BatteryMINDer® Y-Connector Accessory 210-AY)
  • Auto-Restart after power failure.
  • Intrusion protected from water and dust per IEC STANDARD IP65.
  • Bad cell detection with auto-shutdown.
  • Includes Short circuit, spark, reverse polarity protection, thermal runaway protection, automatic D/C disconnect on A/C failure and quick-connect/disconnect fused alligator clip assembly.
  • Very high efficiency. California CEC Approved. Certified to California Energy Commission Standards.
  • Automatically detects input AC power.
  • ECO-mode with hi-efficiency / low power consumption. This allows the unit to always remain connected to AC while consuming very low level of electricity.
  • Ambient temperature compensation. Built-in temperature sensor automatically adjusts charge rate to ensure full-charge. (as low as 0°F or as high as 130°F)
  • 12 LED indicators show state-of-charge and important status mode / battery condition.
  • Rugged, vibration-resistant construction.
  • Never connect two or more batteries together before fully charging each and checking their condition. Failure to fully charge each battery and check their condition can result in a serious safety hazard.

 Learn Why You MUST use an Aviation-Specific Charger 
 

 

What's in the Box Optional Accessories
  • Model 244CEC2-AA-S2 Charger-Maintainer-Desulfator
  • 6' AC cord, 6' DC cord with quick connector (SAE)
  • Auto-Temp Compensation Sensor (Installed)
  • 2' Insulated Battery Clip Cord Set with Quick Connector and 15A replaceable fuse

 

Click Here To View The Instruction Manual
Click Here To View The Errata Sheet
(PDF opens in a new window)

Please note that you need Adobe Acrobat Reader to view the file.
If you do not have it, CLICK HERE to install it.

Get Adobe Reader

  • 210AY: Y Multiple Battery Connector
  • 210RT: Y Multiple Battery Connector w/ Ring Terminal Connector
  • ABS-248: At the Battery Temperature Sensor
  • ATS-1: Ambient Temperature Sensor
  • BC-AA: Insulated Battery Clip Cord Set
  • BC2AY:  Insulated Battery Clips w/ 210AY Y Multiple Battery Connector
  • BM-AIK2: Airframe Interface Kit for use with FAA-Certified Aircrafts
  • DCE12: DC Extension Cables - 12ft.
  • DCE25: DC Extension Cables - 25ft.
  • RTA-2415EXP: Connection for Experimental Aircraft
  • VPP-12: 12/24 Volt Vehicle Power Plug
Voltage:
24V
Charging Current:
4 AMP
Power Source:
90-140 VAC, 47-63 Hz
Temperature Compensation:
Yes: -4°F (-20°C) to 122°F (50°C)
Overcharge Protection:
Yes
Polarity Reversal Protection:
Yes
International Standard IP65*:
Dust tight: No ingress of dust; complete protection against contact (dust tight). Protection from water projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effects.
Multiple Batteries (#):
2
Product Dimensions:
4.9” L x 7.3” W x 2.1” H
Warranty:
5 Year
Works With:
GILL® Aviation Batteries
Comes with:
Auto-Temp Compensation Sensor (Installed), 2' Insulated Battery Clip Cord Set with Quick Connector and 15A replaceable fuse, 2' Ring Terminal Cord Set, Instruction Manual
Optional Accessories:
210AY, 210RT, ABS-248, ATS-1, BCAA, BM-AIK2, DCE12, DCE25, RTA-2415EXP, VPP12
*:
The IP rating of an enclosure, or Ingress Protection Rating specifies how resistant the device is to foreign objects and moisture.
Write a Review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!